PTFE Products

Adhesive PTFE Thread Seal Tape is produced from pure PTFE. Higher the density of Premium Ptfe Thread Seal Tape, more will be the flexibility and improved diffusion seal capability and easier to work with. Polytetrafluoroethylene Thread Seal Tape is used for sealing threaded joints. It is widely used in water plants, cooling and steam system, system of compress air etc. It is also very much useful in hygiene oriented places like hospitals. We are counted among the leading Plastic Thread Seal Tape Exporters in India and abroad. We keep a wide range of PTFE Thread Seal Tape of various width and sizes.

Products Description :
Thread seal tapes are white, NOIA, adhesive thread seal tapes produced from pure Poly tetra fluoro ethylene (PTTE?) commonly tenown as Teflon-* (registered trade marte of DuPont).

Our company is one of the leading Suppliers of PTFE Rods. It is used to produce bearings because of its very low friction and also for its free running ability. Ptfe Molded Rods can easily be machined but due to the surface softness, care must be taken in lathe jaws or high compressive loads, which may cause distortion. Another important element to remember regarding Ptfe Plastic Rods is the coefficient of expansion due to heat changes. We are counted among the leading Ptfe Plastic Rods Manufacturers.

Description :
PTFE Rod is often chosen to produce bearings because of its very low friction and also for its free running ability. Because of its ability to conform to shape otherwise known as flow, PTFE Rod is used for seals in valves, this is because it can conform to shape and create a high specification valve seal. PTFE Rod can easily be machined but due to the surface softness, care must be taken in lathe jaws or high compressive loads, which may cause distortion. Another important element to remember regarding PTFE Rod is the coefficient of expansion due to heat changes; this can be uneven with PTFE and may cause distortion in components.

PTFE Rod is manufactured in two distinct ways, extruded PTFE Rod is the most popular and is relevant to smaller sizes, Moulded PTFE Rod is relevant to the diameters over 100mm in size, smaller sizes are also available in extruded form.

Size :
PTFE Rod is often made in diameters ranging from 3mm diameter up to a maximum diameter of 300mm diameter and is made in lengths which range from 100mm to 1000mm

PTFE Sheets are found in different thickness, ranging from 0.5mm up to 50mm. They are used because of their low friction sideways and wear blocks. Ptfe Molded Sheets provide very low resistance with mating components to offer a free running sideway surface requiring minimal momentum to move products or components. We have carved a niche as one of the key Teflon PTFE Sheets Exporters and Suppliers across India.

Description :
PTFE Sheet is often chosen for very low friction sideways and wears blocks. PTFE Sheets can provide very low resistance with mating components to offer a free running sideway surface requiring minimal momentum to move products or components. PTFE Sheet is also used in lining of cryogenic chambers due to its excellent and rare ability with very low temperatures. Other applications include shims or gaskets for external use; this is because PTFE Sheet is highly resistant to weathering and any environmental long term effects.

PTFE Sheets are available in two form Moulded & Skived. Moulded Sheets are commonly known as Rigid Sheets and Skived sheets are known as flexible or thin sheets.

Size :
Moulded PTFE Sheet is generally available in sheet sizes of 300²mm, 400²mm, 450²mm, 600²mm,1000²mm, 1200²mm, and 1500²mm and in thickness ranging from 0.25mm upto a usual maximum of 100mm with many interspaced range of sizes to suit customers requirements.Skived or Flexible PTFE Sheet is generally available in Roll form from 300mm, 450mm, 500mm, 600mm,1000mm, 1200mm, & 1500,,in width and in thickness ranging from 0.1mm to up 3.5mm.

We are standing in front row amongst the leading Virgin Ptfe Tubes Exporters and Suppliers. Our Polytetrafluoroethylene Tubes can be used in glass equipments because of their wear life. Virgin Ptfe Tubes exported by our company have cryogenic stability with no-wetting property. Ptfe Tubes provide easy application and low maintenance.

Description :
PTFE Bush can be used in glass equipments because of its wear life when compared to other thermoplastics is very low. PTFE bushes have cryogenic stability with non-wetting property. A bush made of PTFE provides easy application and low maintenance. PTFE gaskets, rings etc are machined from
bushes. PTFE �T� Bushes are also available.

Size :
Bushes are available in standard length of 100mm. Larger sizes are made on request only. Generally the OD is from 19mm to 250mm and ID is from 12.5mm to 200mm. Tubes are available in Flexible & Rigid Forms. Flexible Tube in coils are having their OD From 3.2mm to 28mm and ID From 1.6mm to 25mm with wall thickness from 0.8mm to 1.5mm.Rigid Tubes are available in length upto 5meters long having their OD From 25mm to 100mm and ID from 19mm to 89mm with wall thickness ranging from 3mm to 25mm

Our PTFE Balls are perfectly used, where metals or alloys cannot be used. PTFE Plastic Balls are highly functional in self-lubrication conditions such as ball bearings. Today, we are counted among the key PTFE Balls Manufacturers and Suppliers in India. Solid PTFE Balls are available in size range of 6mm to 10mm or according to the specifications of our customers.

Description :
The PTFE ball is a unique product. It has many advantages in applications where metals or alloys can not be used. These advantages are Broad operating temperature (-400^oF to +500^oF), Chemical inertness to most corrosive liquids or gases extremely low coefficient of friction. PTFE balls are highly functional in self lubricating conditions such as ball bearings. In the fluid handling industry PTFE balls are used in ball valves that have contact with extremely corrosive liquids. PTFE ball has reduced maintenance costs and man hours in the field by eliminating the replacement of valve components subjected to corrosive environments.

Size :
Balls are available in size from 6mm to 150mm. But it can also be made in any specifications.

We are one of the most recognized Virgin PTFE Bellows Manufacturers and Suppliers in India. PTFE Flexible Bellows are specially designed from virgin PTFE and counter molded. Our manufacturing process ensures excellent quality of PTFE Flexible Bellows providing durability and low maintenance cost. Virgin PTFE Bellows can be used up to the temperature of 200 degree Celsius. PTFE Bellows are highly corrosion resistant and can be used for aggressive Medias.

Description :
Bellows are specially designed from virgin PTFE and is contour moulded. This manufacturing method guarantees an excellent structure of the material; symptoms of ageing are practically excluded. Very long term durability and low maintenance cost are assured. The bellows can be used upto 200^oC. Bellows serve for compensation of vibration, thermal strain expansion and Axial & Redial motion. These Bellows are meant for resisting highly corrosive plants and piping for aggressive Medias. These Bellows are installed in PTFE Lined Carbon Steel Piping and equipment without additional gaskets. For use with piping and equipment made of glass, enamels and ceramics we recommend PTFE Gaskets, offered as accessory. The sealing surfaces are covered end plates and individually boxed for protection against mechanical damage.Limit bolts are preset to prevent over extension during operation.

Size :
Bellows are manufacturing in different sizes from NB 25mm to NB 300mm. The standard length is 67.5mm long.

Our specially manufactured PTFE Ring Gaskets are widely used in chemical plant, glass lined equipments, etc. due to their high temperature, corrosion and ageing resistant qualities. We are one of the leading exporters of PTFE O Ring Gaskets Exporters. Our company has been renowned widely as one of the leading Suppliers of Solid PTFE Ring Gaskets.

Description :
These gaskets are successfully used in chemical plants, glass/glass lined equipment due to their high temperature, corrosion and ageing resistance. Envelope Gaskets are produced in two forms: - Milled & Slit forms. Milled type envelope is perhaps the better of the two since it is made it fit the insert and present a flat face to the flange. The slit type is perfectly arrogated for many applications where cost is a major consideration. The envelope in this variety does not present a full face to the flange. Solid gaskets can be made to order in different types of shapes and sizes.

Size :
PTFE Envelope is available in 12mm onwards and the 0.5mm flap thickness.PTFE Solid gaskets are available from 12mm on wards and 1mm, 2mm & 3mm in thickness.