||12.5mm, 12 meters x 0.125mm
||12mm, 10 meters x 0.115mm
||12mm, 10 meters x 0.090mm
||12mm, 9 meters x 0.085mm
||12mm, 8 meters x 0.085mm
||12mm X 7 meters, x 0.070mm
Generally you can say about thread seal tape that the higher density (g/cm.3) the better product, that means more flexibility and Improved diffusion seal capability, and In, addition, it makes the tape easier to work with and more economic In, use. Trinity is recommended for natural gas, Gem is recommended for liquid oxygen,.- see separate data sheets. All the above thread seal tape Is available in, 19mm § 25mm In. width also.
Technical Properties :
The exceptional strength and high molecular weight of the fibre-fluorine compound provides PTFE tape series of outstanding qualities. Temperature proofed from, -200oc to +260oC resistant to almost all types of add, bases, solvents, chemicals, etc, however, with the exception, of fluorine some fluoride chemicals and melted alkali metals, very low In, coefficient of friction,. PTFE is inflammable, Non,-ageing. it has high tensile strength even, at low temperatures. Sound electric Insulating power independent of frequency and temperature. PTFB Is rather bad resistant to gamma radiation.
Klooper, Stanley, Inwin & AAA are applied for the sealing of threaded joints on, system for water, compressed air, cooling and steam system and hydraulic systems. Applicable on, all types of materials like Iron,, metal, plastic, fibre etc. Trinity & Gem. are suitable for steam,, chemical, Acid, base solvents this product are very diffusion proof and is therefore suitable for oil and also for hydraulics, Petrol & Diesel,. Thread seal tape Is also suitable on, systems where heavy hygiene requirements are made (hospital, food Industry etc).
Remove any dirt and metal shavings from the thread before application of PTFE tape. Put the tape on the thread joint In the direction of Inclination of the thread. Apply the tape with an even; firm pull to be tight fitting about the thread. Dependent on wanted thickness of layer the overlap should be from. 1/2" to 1" tape width Trinity & Gem Is used alone and without any use of sliding agents.
Trinity Is approved by oil and Natural gas Company (ONGC), Asia's largest oil & gas Co, for all three types of gas. Operating pressure on gas applications is 100mbar. Temperature on gas -20oC to -plus135oC
PTFE Thread seal type is available in variety of widths, lengths to meet your specific requirements.